FSTImc S M5-IG M5-IG 10 CO
Osanro: 10.01.02.01687
Spring plunger in cartridge design with internal damping spring and height compensation
| Shape | Screw |
| Suction cup connection | M5-F |
| Spring stroke Z | 10 (mm) |
| Shape mounting elements | (electrically) conductive |
| Tightening torque (max) | 4 (Nm) |
Suunnitteludata
Suunnitteludata
| Attribuutti | Arvo |
|---|---|
| B | 16 mm |
| d | 2 mm |
| G1 | M5-F |
| G2 | M5-F |
| G3 | M10x1-M |
| H | 61,5 mm |
| H2 | 19 mm |
| L | 10 mm |
| LG2 | 4,1 mm |
| LG3 | 21,5 mm |
| SW1 | 14 mm |
| SW3 | 8 mm |
| Z (Stroke) | 10 mm |
Tekniset tiedot
Tekniset tiedot
| Attribuutti | Arvo |
|---|---|
| Shape mounting elements | (electrically) conductive |
| Spring force center | 0,67 N |
| Spring rate | 0,05 N/mm |
| Spring pretension | 0,42 N |
| Horizontal load | 1,5 N |
| Vertical load | 15 N |
| Tightening torque (max) | 4 Nm |
| Operating temperature | 10 ... 45 °C |
| Weight | 25,1 g |
| Product family | FSTIMC |
CAD-tiedot
CAD-tiedot
Live CAD-malli helppokäyttöinen
Kun napsautat latauspainiketta, voit ladata CAD-mallin eri tiedostomuodoissa. Jos esikatselu ei näy oikein tällä sivulla, napsauta "Lataa uudelleen" -painiketta.
Dokumentointi
Dokumentointi
Suunnittelu on tehty helpoksi!
Konfiguroi FSTImc-jousimäntä, mukaan lukien kiinnityselementti ja siihen liittyvä imukuppi, sovellukseesi sopivaksi helposti Schmalzin uuden konfiguraattorin avulla! Kyselyn jälkeen saat CAD-mallin konfiguraatiosta ja voit toteuttaa sen suoraan sovelluksen suunnittelussa.
Lisätarvikkeet
STV-GE M5-AG 410.08.02.00200Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 7.9 (mm) |
| Length L | 15 (mm) |
STV-GE M5-AG 610.08.02.00201Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 9.9 (mm) |
| Length L | 18.8 (mm) |
STV-W M5-AG 610.08.02.00296Push-in Fitting, swivelling
elbow
| Pressure range (operating pressure) [bar] | bar |
| Length L | 20.8 (mm) |
| Height H | 13 (mm) |
| Thread G1 | M5-M |
HTR-STA 47 1N D10/16 FL10.08.03.00085Holder for flexible mounting of
suction cups/spring plungers on
sections
| Length L | 47 (mm) |
| Connection 1 | Sliding block |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | flat |
HTR-STS 30x30 D10/16 WI10.08.03.00088Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 30x30 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |
HTR-STS 40x40 D10/16 WI10.08.03.00089Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 40x40 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |