DI-PROF 4x6 MOS NK-20 HR
Číslo dílu.: 10.07.04.00054
Sealing section for construction of specific gripper solutions
| Width B | 4 (mm) |
| Height H | 6 (mm) |
| Sealing material | Natural Rubber NK |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | half-round |
Sealing profiles in any desired length for the self-construction of suction cups in the required shape
High-strength two-component profile with glued-on sponge rubber or vulcanized-on foam rubber optimized for highly structured surfaces
Nadstavba
Nadstavba
- Robust and wear-resistant sealing profiles in various cross-sections
- Profile 2K-MOS-20: sealing strip made of foam rubber, vulcanized to support strip (supporting and sealing section made of Chloroprene CR)
- Profile 2K-SWG-20: sealing strip made of foam rubber, glued to support strip (supporting section NBR, sealing section natural rubber NK)
- High-strength supporting-section material with profile on the sides for plugging into a corresponding supporting plate
Technické údaje
Technické údaje
- Dimensions: 4 x 6 to 30 x 25 mm
- Cross sections: 8 x 1 mm to 25 x 20 mm
Dokumentace
Dokumentace
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 10 z 13 výsledků
DI-PROF 4x13 NBR-60
Číslo dílu.: 10.07.04.00065
Sealing section for construction of specific gripper solutions
| Width B | 4 (mm) |
| Height H | 13 (mm) |
| Sealing material | Perbunan NBR |
| Material hardness [Shore A] | 60 (Shore A) |
DI-PROF 5.5x8 2K-MOS CR-20/60
Číslo dílu.: 10.01.01.10554
Sealing section for construction of specific gripper solutions
| Width B | 5.5 (mm) |
| Height H | 8 (mm) |
| Sealing material | Chloroprene CR |
| Material hardness [Shore A] | 20 (Shore A) |
DI-PROF 6x8 MOS NK-20 HR
Číslo dílu.: 10.07.04.00014
Sealing section for construction of specific gripper solutions
| Width B | 6 (mm) |
| Height H | 8 (mm) |
| Sealing material | Natural Rubber NK |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | half-round |
DI-PROF 8x14 MOS NK-20 DL
Číslo dílu.: 10.07.04.00012
Sealing section for construction of specific gripper solutions
| Width B | 8 (mm) |
| Height H | 14 (mm) |
| Sealing material | Natural Rubber NK |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | with sealing lip |
DI-PROF 9x9.7 2K-MOS CR-20/60
Číslo dílu.: 10.01.01.10527
Sealing section for construction of specific gripper solutions
| Width B | 9 (mm) |
| Height H | 9.7 (mm) |
| Sealing material | Chloroprene CR |
| Material hardness [Shore A] | 20 (Shore A) |
DI-PROF 10x6 MOS EPDM-20
Číslo dílu.: 10.07.04.00006
Sealing section for construction of specific gripper solutions
| Width B | 10 (mm) |
| Height H | 6 (mm) |
| Material type | Foam rubber |
| Sealing material | EPDM |
| Material hardness [Shore A] | 20 (Shore A) |
DI-PROF 10x20 MOS EPDM-20 HR
Číslo dílu.: 10.07.04.00010
Sealing section for construction of specific gripper solutions
| Width B | 10 (mm) |
| Height H | 20 (mm) |
| Sealing material | EPDM |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | half-round |
DI-PROF 11x23 MOS CR-20 DL
Číslo dílu.: 10.07.04.00015
Sealing section for construction of specific gripper solutions
| Width B | 11 (mm) |
| Height H | 23 (mm) |
| Material type | Foam rubber |
| Sealing material | Chloroprene CR |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | with sealing lip |
DI-PROF 12x17 MOS EPDM-20 HR
Číslo dílu.: 10.07.04.00011
Sealing section for construction of specific gripper solutions
| Width B | 12 (mm) |
| Height H | 17 (mm) |
| Sealing material | EPDM |
| Material hardness [Shore A] | 20 (Shore A) |
| Form | half-round |