Sealing Profiles DI-PROF

Dimensions from 4 x 6 mm to 30 x 25 mm

Go directly to the products

Sealing profiles in any desired length for the self-construction of suction cups in the required shape

High-strength two-component profile with glued-on sponge rubber or vulcanized-on foam rubber optimized for highly structured surfaces

Design

Robust and wear-resistant sealing profiles in various cross-sections
Profile 2K-MOS-20: sealing strip made of foam rubber, vulcanized to support strip (supporting and sealing section made of Chloroprene CR)
Profile 2K-SWG-20: sealing strip made of foam rubber, glued to support strip (supporting section NBR, sealing section natural rubber NK)
High-strength supporting-section material with profile on the sides for plugging into a corresponding supporting plate

Technical Data

Dimensions: 4 x 6 to 30 x 25 mm
Cross sections: 8 x 1 mm to 25 x 20 mm

Documentation

The matching documentation for this product is available in this section.

Documents	Language
Product family overview	Slovenian

The documentation is also fully available in English.

Documents	Language
Product family overview	English

1 - 10 from 13 results

DI-PROF 4x6 MOS NK-20 HR

Part no.: 10.07.04.00054

Sealing section for construction of specific gripper solutions

Width B	4 (mm)
Height H	6 (mm)
Sealing material	Natural Rubber NK
Material hardness [Shore A]	20 (Shore A)
Form	half-round

DI-PROF 4x13 NBR-60

Part no.: 10.07.04.00065

Sealing section for construction of specific gripper solutions

Width B	4 (mm)
Height H	13 (mm)
Sealing material	Perbunan NBR
Material hardness [Shore A]	60 (Shore A)

DI-PROF 5.5x8 2K-MOS CR-20/60

Part no.: 10.01.01.10554

Sealing section for construction of specific gripper solutions

Width B	5.5 (mm)
Height H	8 (mm)
Sealing material	Chloroprene CR
Material hardness [Shore A]	20 (Shore A)

DI-PROF 6x8 MOS NK-20 HR

Part no.: 10.07.04.00014

Sealing section for construction of specific gripper solutions

Width B	6 (mm)
Height H	8 (mm)
Sealing material	Natural Rubber NK
Material hardness [Shore A]	20 (Shore A)
Form	half-round

DI-PROF 8x14 MOS NK-20 DL

Part no.: 10.07.04.00012

Sealing section for construction of specific gripper solutions

Width B	8 (mm)
Height H	14 (mm)
Sealing material	Natural Rubber NK
Material hardness [Shore A]	20 (Shore A)
Form	with sealing lip

DI-PROF 9x9.7 2K-MOS CR-20/60

Part no.: 10.01.01.10527

Sealing section for construction of specific gripper solutions

Width B	9 (mm)
Height H	9.7 (mm)
Sealing material	Chloroprene CR
Material hardness [Shore A]	20 (Shore A)

DI-PROF 10x6 MOS EPDM-20

Part no.: 10.07.04.00006

Sealing section for construction of specific gripper solutions

Width B	10 (mm)
Height H	6 (mm)
Material type	Foam rubber
Sealing material	EPDM
Material hardness [Shore A]	20 (Shore A)

DI-PROF 10x20 MOS EPDM-20 HR

Part no.: 10.07.04.00010

Sealing section for construction of specific gripper solutions

Width B	10 (mm)
Height H	20 (mm)
Material type	Foam rubber
Sealing material	EPDM
Material hardness [Shore A]	20 (Shore A)
Form	half-round

DI-PROF 11x23 MOS CR-20 DL

Part no.: 10.07.04.00015

Sealing section for construction of specific gripper solutions

Width B	11 (mm)
Height H	23 (mm)
Material type	Foam rubber
Sealing material	Chloroprene CR
Material hardness [Shore A]	20 (Shore A)
Form	with sealing lip

DI-PROF 12x17 MOS EPDM-20 HR

Part no.: 10.07.04.00011

Sealing section for construction of specific gripper solutions

Width B	12 (mm)
Height H	17 (mm)
Sealing material	EPDM
Material hardness [Shore A]	20 (Shore A)
Form	half-round