Spare and Wear Parts VacuMaster Coil
- Wide range of spare and wear parts
- Vacuum generator, filter, suction plates
Vacuum Lifting Devices VacuMaster Coil
Handling coils and slit strip
Handling of coils and slit strips
Separate, individually controlled vacuum chambers for handling coils of different sizes with just a single device
Transparent acrylic glass suction plate provides optimal viewing to ensure reliable pick-up and exact positioning of the coils
Handling with vacumm allows for damage-free gripping without mechanical clamps
Effortless swiveling and flush-to-floor depositing possible thanks to electric drive for precise, stepless swiveling of the load
Design
Design
- Vacuum lifting device (1) with separately switchable vacuum chambers (suction rings)
- Electrical vacuum pump (2) for short evacuation times
- Electric drive (3) for precise, continuous swiveling of the load
- Transparent suction plate (4) for easy positioning of the load
- Audible warning device and vacuum reservoir (5) for protection against vacuum drop in case of a power failure
Technical Data
Technical Data
.jpg)
| Type | Max. lift capacity [kg] | Min. workpiece Ø [mm] | Max. workpiece Ø [mm] | Number of suction clamps |
|---|---|---|---|---|
| Coil 500 90° | 500 | 600 | 1,200 | 3 |
| Coil 750 90° | 750 | 600 | 1,400 | 3 |
| Coil 1000 90° | 1.000 | 750 | 1,800 | 3 |
| Type | Ø suction plate inner D1 [mm] | Ø suction plate outer D2 [mm] | Overall height H [mm] | Operator handle L1 [mm] | Weight [kg] |
|---|---|---|---|---|---|
| Coil 500 90° | 410 | 850 | 1,300 | 660 | 140 |
| Coil 750 90° | 410 | 1,050 | 1,300 | 660 | 155 |
| Coil 1000 90° | 410 | 1,200 | 1,300 | 660 | 190 |
Product Inquiry
Awarded the seal of approval by Aktion Gesunder Rücken e. V.
Schmalz vacuum lifters and crane systems support the back and musculoskeletal system when lifting light and heavy loads. They reduce strain and help to make the work environment ergonomic. This is confirmed by the independent association Aktion Gesunder Rücken e. V. (AGR) with its seal of approval.
Spare parts
Accessories
CEE-Connect
Quick-connect electrical connection
The CEE plug suggests the lifting device to be easily connected to the power supply and then quickly disconnected if necessary.
Product recommendations
Aluminum Bridge Cranes
- Modular crane system for flexible and cost-effective assembly of individual crane solutions
- Installation on ceiling or portal construction
- Particularly suitable for large workspaces
- Lift capacity up to 1,200 kg
Wall-Mounted Jib Cranes
- Mounted using a wall bracket or clasp bracket
- Lift capacity up to 1,000 kg
Chain Hoists
- Sturdy chain hoist with limit switch
- Lift capacity up to 2,500 kg
- Standard lifting height of 3,000 mm
- CSA certified for USA and Canada
Column-Mounted Jib Cranes
- Fitted with anchors for floor mounting
- Lift capacity up to 1,000 kg
- Optionally with mobile base plate (lift capacity up to 200 kg)