
Part no.: 10.01.01.12461
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | G1/4"-M |
Material hardness [Shore A] | 65 (Shore A) |
Nipple material | |
Connection | G1/4-AG |
Silicone-free special material HT2 is free of LABS and temperature resistant up to 250 °C
Oval edge suction cup for long workpieces or stamped and body parts
Structured inner support prevents deep drawing and withstands maximum lateral forces
Vulcanized connection nipple avoids machine damage and downtime due to loss of suction cups
The matching documentation for this product is available in this section.
Documents | Language |
---|---|
Croatian |
The documentation is also fully available in English.
Documents | Language |
---|---|
English |
1 - 3 from 3 results
Part no.: 10.01.01.12461
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | G1/4"-M |
Material hardness [Shore A] | 65 (Shore A) |
Nipple material | |
Connection | G1/4-AG |
Part no.: 10.01.01.12462
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | G1/4"-F |
Material hardness [Shore A] | 65 (Shore A) |
Nipple material | |
Connection | G1/4-IG |
Part no.: 10.01.01.12463
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | G3/8"-F |
Material hardness [Shore A] | 65 (Shore A) |
Nipple material | |
Connection | G3/8-IG |