PFYN 50 VU1-72 G1/4-AG
Onderdeelnr.: 10.01.01.00521
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 50 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-AG |
Flat Suction Cups PFYN VU1
Highly tear resistant material Vulkollan VU1 withstands enormous stress
Insensitive to oils thanks to good chemical resistance
Temperature resistant at low (- 40 °C) and higher temperatures (+ 80 °C, short-term up to + 100 °C)
Abrasion of only approx. 10 - 12 mm³ according to DIN 53516 allows up to 20 times longer service life than standard NBR
Support surfaces on the bottom prevent permanent deformation of thin-walled workpieces
Ontwerp
Ontwerp
- Robust, wear-resistant suction cup PFYN (3) with single sealing lip, consisting of suction cup PFG (2), made of Vulkollan VU1, and connection nipple (1)
- Suction cup connected positively to nipple; no turning even when handling heavy loads
- With each nipple family, the replacement cups and nipples can be combined as desired
Technische gegevens
Technische gegevens
- Diameter: 15 to 95 mm
- Material: VU1
- Connection nipple plugged into elastomer part
1 - 10 van 12 resultaten
PFYN 80 VU1-72 G1/4-AG
Onderdeelnr.: 10.01.01.00522
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 80 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-AG |
PFYN 95 VU1-72 G1/4-AG
Onderdeelnr.: 10.01.01.00523
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 95 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-AG |
PFYN 80 VU1-72 G1/4-IG
Onderdeelnr.: 10.01.01.00524
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 80 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-IG |
PFYN 95 VU1-72 G1/4-IG
Onderdeelnr.: 10.01.01.00525
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 95 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-IG |
PFYN 50 VU1-72 G1/4-IG
Onderdeelnr.: 10.01.01.00547
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 50 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-IG |
PFYN 30 VU1-72 G1/8-AG
Onderdeelnr.: 10.01.01.00550
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 30 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-AG |
PFYN 15 VU1-72 G1/8-AG
Onderdeelnr.: 10.01.01.00556
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 15 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-AG |
PFYN 15 VU1-72 G1/8-IG
Onderdeelnr.: 10.01.01.00557
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 15 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-IG |
PFYN 30 VU1-72 G1/8-IG
Onderdeelnr.: 10.01.01.00558
Vlakke vacuümgrijper (rond) voor gladde of licht ruwe oppervlakken
| Size | 30 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-IG |