Magnetic Grippers SGM-HPm
Gripping surface (Ø) 30 mm and 40 mm
Safe gripping due to permanent magnet, even in case of power failure
High holding forces with thin workpieces
Extensive range of accessories and sensor technology for all common body shop applications
Robust design suitable for use in welding cells
High flexibility, as tooling connection also possible laterally
Projekt
Projekt
- Robust aluminum housing with permanent magnet and gripping element (1)
- Bistable design: the magnet settings “grip” and “deposit” are maintained in event of power failure at the compressed air connection (5)
- Mounting the gripper via thread on head side and on two sides; optionally with Schmalz holder system HTS (4)
- Optional gripping elements for sheets with different thicknesses or 3D surfaces (2)
- Optional centering pin (3) for precise gripping around bores
- Optional proximity switch for switching state detection, component monitoring or double sheet detection; installation in housing groove
Dane techniczne
Dane techniczne
- Diameter: 30 mm and 40 mm
- Maximum holding force (at 2 mm workpiece thickness): 387 N
- High holding forces with thin workpieces
Branże
Branże
- •Blacha / motoryzacyjny
Dokumentacja
Dokumentacja
Dokumentacja dopasowania dla tego produktu jest dostępna w tej sekcji.
| Dokumenty | Język |
|---|---|
| Polska |
Dokumentacja jest również w pełni dostępna w języku angielskim.
| Dokumenty | Język |
|---|---|
| Język angielski |