| Size | 100 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/4"-F |
Support surfaces on the bottom prevent permanent deformation of thin-walled workpieces
Fastest cycle times thanks to low own volume
Wide range of diameters for a large selection of different workpieces
High suction force with small dimensions
Projekt
Projekt
- Suction plate SPU consisting of sealing ring (3) and aluminum supporting plate (1)
- Sealing ring clipped securely onto supporting plate with positive locking
- Internal sealing edge (4) for better sealing on slightly rough surfaces
- Side vacuum connector (2) normally sealed with a plug (glued into position for extra safety)
- Series SPU TV: touch valve already installed
Dane techniczne
Dane techniczne
- Diameter: 100 to 400 mm
- Material: NBR, SI
- Supporting plate made of aluminum
Dokumentacja
Dokumentacja
Dokumentacja dopasowania dla tego produktu jest dostępna w tej sekcji.
| Dokumenty | Język |
|---|---|
| Polska |
Dokumentacja jest również w pełni dostępna w języku angielskim.
| Dokumenty | Język |
|---|---|
| Język angielski |
1 - 10 z 30 wyników
| Size | 100 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 60 (Shore A) |
| Connection | G1/4"-F |
| Size | 125 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/4"-F |
| Size | 125 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/4"-F |
| Size | 125 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 60 (Shore A) |
| Connection | G1/4"-F |
| Size | 160 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/2"-F |
| Size | 160 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/2"-F |
SPU 125 SI-60 G1/4-IG TV
Część nr.: 10.01.01.01158
Suction plate (round), universal, for smooth and slightly rough surfaces
| Size | 125 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 60 (Shore A) |
| Connection | G1/4"-F |
| Size | 210 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/2"-F |
| Size | 125 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Connection | G1/4"-F |