Izvedite več zdaj
Adapter-Plates Innospann ISST-MPL and Elastomer Mats FlexMat SFM
Steel-Plate and Flexmat for use on Matrix-Plate MPL
The modular system for use on the Matrix-Plate MPL can be retrofitted as required
Honeycomb structure of the suction points to increase the usable area for maximum vacuum clamping force
Milling at partial occupancy due to numerous vacuum chambers with integrated flow resistors
FlexMat optimized for production of cutouts and inexpensive and quickly replaceable in case of wear
Elastomer surface with special support withstands strongest lateral forces
Design
Design
- Vacuum blocks ISBL made of aluminum (1) with double seal and magnetic pre-fixation on the Steel-Plate
- Schmalz FlexMat SFM (2) for use directly on the Steel-Plate
- Sealing magnets (3) for unused vacuum openings when used with vacuum blocks ISBL
- Steel-Plate with vacuum openings (4)
- Matrix-Plate MPL (5) as basic unit of the modular clamping system
Technical Data
Technical Data
- Steel-Plate ISST and elastomer mat with honeycomb suction points for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For the production of cutouts
Industries
Industries
- •Aerospace
- •Metal
- •Plastics
Documentation
Documentation
Success Stories
Success Stories
1 - 4 iz rezultatov 4
ISST-MPL 400x300x3 SFM
Part no.: 10.01.28.00022
Steelplate for use with Matrix-Plate
Industries: Metal | Plastics | Aerospace
| Length L | 400 (mm) |
| Width B | 300 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
ISST-MPL 600x400x3 SFM
Part no.: 10.01.28.00023
Steelplate for use with Matrix-Plate
Industries: Metal | Plastics | Aerospace
| Length L | 600 (mm) |
| Width B | 400 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
ISST-MPL 300x200x3 SFM
Part no.: 10.01.28.00021
Steelplate for use with Matrix-Plate
Industries: Metal | Plastics | Aerospace
| Length L | 300 (mm) |
| Width B | 200 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
| Material | Plastics |
| Utilization design | Matrix-Plate |
| Length L | 298.5 (mm) |
| Width B | 198.5 (mm) |
| Height H | 2.5 (mm) |
Product recommendations
Matrix-Plates MPL
- Basis of the modular system for metal and plastics processing
- Low-distortion clamping of flat workpieces
- Adaptable to all common machine tables
Adapter-Plates Innospann ISST-MPL and Vacuum Suction Cups ISBL
- Steel-Plate ISST with vacuum blocks ISBL for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For 5-axis machining and the production of cutouts
- NEW
Vacuum Units VH-OG LS
- Mobile vacuum generation and monitoring
- Suction rate 10, 21, 40, 63 and 100 m³/h
- Max. vacuum: 98 %
- Version: LS with oil-lubricated pump, intelligent system, cooling lubricant separation and recirculation via compressed air
- NEW
Pneumatic Vacuum Generators CVU
- Vacuum generators for use in CNC machines for metal processing
- Suction rate up to 8.6 m³/h
- Degree of evacuation up to 85 %
- Optional with energy-saving control, reservoir or vacuum switch for safety switching
Clamping Equipment for Metal and Plastic Processing
- Vacuum clamping technology for CNC machining of metal or plastic workpieces
- With special friction pad for high clamping forces
- Tight tolerances for high dimensional requirements