Tìm hiểu thêm ngay bây giờ
Adapter-Plates Innospann ISST-MPL and Elastomer Mats FlexMat SFM
Steel-Plate and Flexmat for use on Matrix-Plate MPL
The modular system for use on the Matrix-Plate MPL can be retrofitted as required
Honeycomb structure of the suction points to increase the usable area for maximum vacuum clamping force
Milling at partial occupancy due to numerous vacuum chambers with integrated flow resistors
FlexMat optimized for production of cutouts and inexpensive and quickly replaceable in case of wear
Elastomer surface with special support withstands strongest lateral forces
Cấu trúc
Cấu trúc
- Vacuum blocks ISBL made of aluminum (1) with double seal and magnetic pre-fixation on the Steel-Plate
- Schmalz FlexMat SFM (2) for use directly on the Steel-Plate
- Sealing magnets (3) for unused vacuum openings when used with vacuum blocks ISBL
- Steel-Plate with vacuum openings (4)
- Matrix-Plate MPL (5) as basic unit of the modular clamping system
Thông số kỹ thuật
Thông số kỹ thuật
- Steel-Plate ISST and elastomer mat with honeycomb suction points for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For the production of cutouts
Các ngành
Các ngành
- •Aerospace
- •Metal
- •Plastics
Tài liệu
Tài liệu
Tại phần này, quý vị sẽ tìm thấy các tài liệu hướng dẫn phù hợp với sản phẩm này.
| Tài liệu | Ngôn ngữ |
|---|---|
| Vietnamese |
Tài liệu này cũng có sẵn đầy đủ bằng tiếng Anh.
| Tài liệu | Ngôn ngữ |
|---|---|
| English |
Câu chuyện thành công
Câu chuyện thành công
1 - 4 từ 4 kết quả
ISST-MPL 400x300x3 SFM
Mã sản phẩm: 10.01.28.00022
Steelplate for use with Matrix-Plate
Các ngành: Metal | Plastics | Aerospace
| Length L | 400 (mm) |
| Width B | 300 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
ISST-MPL 300x200x3 SFM
Mã sản phẩm: 10.01.28.00021
Steelplate for use with Matrix-Plate
Các ngành: Metal | Plastics | Aerospace
| Length L | 300 (mm) |
| Width B | 200 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
ISST-MPL 600x400x3 SFM
Mã sản phẩm: 10.01.28.00023
Steelplate for use with Matrix-Plate
Các ngành: Metal | Plastics | Aerospace
| Length L | 600 (mm) |
| Width B | 400 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
SFM-298.5x198.5
Mã sản phẩm: 10.01.28.00005
Elastomer mat for fixing workpieces
Các ngành: Metal | Plastics | Aerospace
| Material | Plastics |
| Utilization design | Matrix-Plate |
| Length L | 298.5 (mm) |
| Width B | 198.5 (mm) |
| Height H | 2.5 (mm) |
Gợi ý sản phẩm
Matrix-Plates MPL
- Basis of the modular system for metal and plastics processing
- Low-distortion clamping of flat workpieces
- Adaptable to all common machine tables
Adapter-Plates Innospann ISST-MPL and Vacuum Suction Cups ISBL
- Steel-Plate ISST with vacuum blocks ISBL for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For 5-axis machining and the production of cutouts
Vacuum Units VH-OG LS
- Mobile vacuum generation and monitoring
- Suction rate 10, 21, 40, 63 and 100 m³/h
- Max. vacuum: 98 %
- Version: LS with oil-lubricated pump, intelligent system, cooling lubricant separation and recirculation via compressed air
Pneumatic Vacuum Generators CVU
- Vacuum generators for use in CNC machines for metal processing
- Suction rate up to 8.6 m³/h
- Degree of evacuation up to 85 %
- Optional with energy-saving control, reservoir or vacuum switch for safety switching
Clamping Equipment for Metal and Plastic Processing
- Vacuum clamping technology for CNC machining of metal or plastic workpieces
- With special friction pad for high clamping forces
- Tight tolerances for high dimensional requirements