| Shape | |
| Function | |
| Form | |
| Length L | 280 (mm) |
| Width B | 280 (mm) |
| Height H | 86.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Number of suction cells | 31 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
Area Gripping Systems FQE-V Xc
Gripping surface (LxW in mm) scalable from 110 x 230 mm to 400 x 280 mm
Freely scalable gripper dimensions for precise handling of the project-specific workpiece geometry
Innovative product design in accordance with ISO TS 15066 enables HRC operation
Modular lightweight construction for low weight and therefore higher effective load capacity
Particularly energy-efficient, integrated vacuum generation for low operating costs and high operational reliability
Low sound level for minimal noise pollution for surrounding employees
Design
Design
- Flange connector (1)
- Silencer cover (2) and sound insulation (5)
- Ejector modules ecoPump SEP (3) for vacuum generation
- Suction tray (4) and suction plate (replaceable) (6)
- Multi-pin plug (7)
Technical Data
Technical Data
- Integrated, pneumatic vacuum generation and valves for control
- Freely scalable, 3D-printed suction plate
- Suitable for lightweight robotics and operation with collaborative robots
- Sealing element: sealing foam, suction cup
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 8 from 8 results
| Shape | |
| Function | |
| Form | |
| Length L | 230 (mm) |
| Width B | 120 (mm) |
| Height H | 86.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Number of suction cells | 48 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
FQE-V Xc CI 280x280 SW80 SPB2 F
Part no.: 10.01.44.00570
Vacuum area gripping system with flow resistors
| Shape | |
| Function | |
| Form | |
| Length L | 280 (mm) |
| Width B | 280 (mm) |
| Height H | 92.6 (mm) |
| Nozzle diameter | 0.8 (mm) |
| with | Filter |
| Suction cup type | |
| Diameter Ds | 20 (mm) |
| Number of suction cells | 56 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
FQE-V Xc R 230x120 SW80 SPB2 F
Part no.: 10.01.44.00580
Vacuum area gripping system with flow resistors
| Shape | |
| Function | |
| Form | |
| Length L | 230 (mm) |
| Width B | 120 (mm) |
| Height H | 92.6 (mm) |
| Nozzle diameter | 0.8 (mm) |
| with | Filter |
| Suction cup type | |
| Diameter Ds | 20 (mm) |
| Number of suction cells | 42 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
FQE-V Xc R 400x280 SW80 SPB2 F
Part no.: 10.01.44.00560
Vacuum area gripping system with flow resistors
| Shape | |
| Function | |
| Form | |
| Length L | 400 (mm) |
| Width B | 280 (mm) |
| Height H | 115.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| with | Filter |
| Suction cup type | |
| Diameter Ds | 40 (mm) |
| Number of suction cells | 45 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
| Shape | |
| Function | |
| Form | |
| Length L | 400 (mm) |
| Width B | 280 (mm) |
| Height H | 86.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Number of suction cells | 45 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
FQE-V Xc OV 400x280 SW80 SPB2 F
Part no.: 10.01.44.00568
Vacuum area gripping system with flow resistors
| Shape | |
| Function | |
| Form | |
| Length L | 400 (mm) |
| Width B | 280 (mm) |
| Height H | 115.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| with | Filter |
| Suction cup type | |
| Diameter Ds | 40 (mm) |
| Number of suction cells | 34 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |
| Shape | |
| Function | |
| Form | |
| Length L | 400 (mm) |
| Width B | 280 (mm) |
| Height H | 86.3 (mm) |
| Nozzle diameter | 0.8 (mm) |
| Number of suction cells | 43 |
| Number of ejectors | 3 |
| Design vacuum generator | |
| Control valve |