RECBi 24V-DC NO PXT-1 1C M12-8
Part no.: 10.02.03.00468
Pneumatic end-of-arm vacuum generator for lightweight and industrial robots
| Voltage DC | 24 V - DC |
| Control valve | Normally open |
| Rated power | 1 (W) |
| Rated current | 0 (A) |
| Additional function area gripper | PXT (1 beam) |
| Utilization | DIO / IO-Link |
| Dmk | 50 (mm) |
| Electrical connection | Male connect M12, 8 pol |
Design Data
Design Data
| Attribute | Value |
|---|---|
| B | 75 mm |
| D | 75 mm |
| d1 | 6,4 mm |
| D2 | 31,5 mm |
| Dmk | 50 mm |
| G2 | M12-M |
| G3 | G1/8"-F |
| H | 68 mm |
| H1 | 68 mm |
| H2 | 25 mm |
| H3 | 19 mm |
| L | 107,5 mm |
| L2 | 70 mm |
| L3 | 75,5 mm |
Technical Data
Technical Data
| Attribute | Value |
|---|---|
| Degree of evacuation | 85 % |
| Max. vacuum | 850 mbar |
| Suction rate (max.) | 52,5 l/min |
| Rated power | 1 W |
| Voltage DC | 24 V - DC |
| Pressure range (operating pressure) [bar] | 3.00 ... 7.00 bar |
| Electrical connection | Male connect M12, 8 pol |
| Protection type IP | IP 40 |
| Operating temperature | 0 ... 50 °C |
| Control valve | Normally open |
Documentation
Documentation
Software
Software
The matching software for this product is available in this section.
| Documentation | Language |
|---|---|
| English |
Spare parts
ERS RECB SD10.02.03.00422Spare part set
| Utilization design | Pneumatic vacuum generator RECB |
| Operating temperature | °C |
| Pressure range (operating pressure) [bar] | bar |
| contains | Silencer |
| and | Screws |
ERS SEP-13 6xRUE-KLAP10.02.01.01449Spare part set
| Utilization design | Ejector module |
| Size | 13 |
| contains | 6x flap |
SEP HV 2 14 13 S10.02.01.01493Multistagenozzle as a cartridge
| Suction rate (max.) | 65.8 (l/min) |
| Operating temperature | 0 ... 60 °C |
| Shape | High vacuum |
| Number of stages | 2 |
| Hole diameter | 13 (mm) |
| Shape compact ejectors | S |
| Degree of evacuation | 85 (%) |
| Pressure range (operating pressure) [bar] | 2.0 ... 6.0 bar |
| Optimal operating pressure | 4 (bar) |
Accessories
VENT-BGR EMVP-5 3/2 NC 24V-DC10.08.09.00032Building group Solenoid valve
Control of vacuum and compressed air
| Voltage DC | 24 V - DC |
| Pressure range (operating pressure) [bar] | -0.9 ... 8.0 bar |
| Control valve | Normally closed |
| Nominal size | 5 (mm) |
| Nominal flow rate | 3 (m³/h) |
| Type | RECB |
ASK B-M12-8 5000 K-8P21.04.05.00079Connection cable
| Electrical connection | Fem connect M12, 8 pol |
| Cable length | 5000 (mm) |
| Connection 2 | Cable, 8-pole |
| Material hose | PUR cable |
SD 66.7x24.4x24.5 RECBi10.02.03.00441Silencer for vacuum generators
| Utilization design | Pneumatic vacuum generators RECBi |
| Length L | 66.7 (mm) |
| Width B | 24.4 (mm) |
| Height H | 24.5 (mm) |
ASK B-M12-8 295 WB-M8-8 FANUC21.04.05.00827Connection cable
| Electrical connection | Fem connect M12, 8 pol |
| Connection 2 | Angle female connector M8, 8-pole |
| Cable length | 295 (mm) |
ASK B-M12-8 280 WB-M8-8 UR21.04.05.00350Connection cable
| Electrical connection | Fem connect M12, 8 pol |
| Connection 2 | Angle female connector M8, 8-pole |
| Cable length | 280 (mm) |
PXT STARTERKIT 1 410.01.49.00090Starter set PXT, gripper constr. kit
for building vacuum gripper
spiders
| Number of longitudinal beams | 1 |
| Number of suction plates | 4 |
PXT STARTERKIT 2 610.01.49.00091Starter set PXT, gripper constr. kit
for building vacuum gripper
spiders
| Number of longitudinal beams | 2 |
| Number of suction plates | 6 |