| Size | 5 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
Bellows Suction Cups FSG (2.5 Folds)
Suction area (Ø) from 3 mm to 32 mm
Large selection of materials for a wide range of requirements (temperature-resistant, conductive, non-marking, dissipative)
High suction force and effective damping during placement on workpiece
Very high suction cup stroke due to 2.5 folds
Soft, tapered sealing lip adapts optimally to curved surfaces
Special Offer: Test Suction Cups Made From the New Material HT1-ESD for Free
Need to optimize handling in electronics production? With our suction cups made from the new material HT1-ESD, we are setting new standards for handling processes in the production of final products, consumer electronics and home appliances.
The material offers permanent ESD protection, enables handling with minimized marks and has good resistance to high temperatures and ozone, without any critical additives or coatings that could diffuse into production environments and generate harmful particles.
Receive up to 20 free test samples for your system – including personal on-site consultation.
Design
Design
- Robust and wear-resistant suction cup FSG (3) with single sealing lip, consisting of suction cup FG (2) with 2.5 folds and connection nipple (1)
- All nipples are plugged in
- With each nipple family, the replacement cups and nipples can be combined as desired
Technical Data
Technical Data
- Diameter: 3 to 32 mm
- Material: HT1, NBR, NBR-CO, NBR-ESD, SI, SI-CO
- Connection nipple plugged into elastomer part
- Conductive, dissipative and mark-free variants
1 - 10 from 42 results
| Size | 5 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-F |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 5 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 5 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M5-F |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-F |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | G1/8"-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 9 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | G1/8"-F |
| Number of folds | 2.5 |
| Product family | FSG |
pages.category.relatedProductsAndCategories
Compact Ejectors SCPMb / SCPMc / SCPMi
- Suction capacity up to 28 l/min
- Max. vacuum: 92 %
- Main body made of plastics
Vacuum / Compressed Air Hoses VSL
- External/internal diameters from 4/2 to 87/75
- Material: PA, PE, PU, PVC
Spring Plungers FSTIm
- Modular suction cup connection
- Stroke: 5 to 20 mm
- Internal damping spring
- With and without anti-rotation guard