| Size | 3 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
Bellows Suction Cups FSG (2.5 Folds)
Suction area (Ø) from 3 mm to 32 mm
Large selection of materials for a wide range of requirements (temperature-resistant, conductive, non-marking, dissipative)
High suction force and effective damping during placement on workpiece
Very high suction cup stroke due to 2.5 folds
Soft, tapered sealing lip adapts optimally to curved surfaces
Sensitive Electronics Perfectly Handled – Minimized Marks, Maximized ESD Protection
In electronics manufacturing, there is no second chance. One tiny mark, one static discharge and entire batches are ruined. Not with us!
Our innovative suction cups made the material of HT1-ESD solve these challenges and many more: They protect workpieces from unwanted marks and ESD damage. With our suction cups, you benefit from:
- Clean surfaces
- Maximum component safety
- Reliability at high temperatures
- High system availability and cost efficiency
Thanks to our extensive expertise in material development, the suction cup material HT1-ESD stands for cutting-edge technology and sets new standards in electronics manufacturing.
Design
Design
- Robust and wear-resistant suction cup FSG (3) with single sealing lip, consisting of suction cup FG (2) with 2.5 folds and connection nipple (1)
- All nipples are plugged in
- With each nipple family, the replacement cups and nipples can be combined as desired
Technical Data
Technical Data
- Diameter: 3 to 32 mm
- Material: HT1, NBR, NBR-CO, NBR-ESD, SI, SI-CO
- Connection nipple plugged into elastomer part
- Conductive, dissipative and mark-free variants
1 - 10 from 171 results
| Size | 3 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Silicone SI conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Silicone SI conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |