Controlled discharge of sucked air (optional) prevents contamination of the process area
Flange modules enable flexible connection to different robot connections and fast gripper change
Gentle handling and precise positioning with the suction/damping module
Holder system HTR for mounting sensors for distance measurement and occupancy testing
Micro valves prevent delays thanks to compressed air control directly at the vacuum generator
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 10 z 14 výsledků
Číslo dílu.: 10.01.01.12912
Floating suction cup module for increasing the transfer height of sensitive workpieces
| Width B | 14 (mm) |
| Number of holes | 3 |
| Length L | 30.85 (mm) |
| Angle of radiation | 90 (°) |
| Connection | Hose 4/2 |
| Slewing angle W | 0 (°) |
Číslo dílu.: 10.05.01.00288
Solenoid valve EMV for direct control of compressed air
| Nominal size | 1.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | M5-M |
| Pressure range (operating pressure) [bar] | 2.5 ... 7.0 bar |
| Power consumption DC | 2.8 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.065 (kg) |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | AB1 |
| Outside diameter D | 63 (mm) |
| Length L | 10.5 (mm) |
| Size | AD1 |
Číslo dílu.: 10.05.01.00289
Solenoid valve EMV for direct control of compressed air
| Nominal size | 2.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | G1/8"-M |
| Pressure range (operating pressure) [bar] | 2.0 ... 8.0 bar |
| Power consumption DC | 4.5 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.1 (kg) |
| Outside diameter D | 63 (mm) |
| Length L | 11.5 (mm) |
| Size | UNI |
| Outside diameter D | 80 (mm) |
| Length L | 12 (mm) |
| Size | ST1 |
| Utilization design | Wafer- / Composite gripper |
| Outside diameter D | 18 (mm) |
| Length L1 | 46 (mm) |
| Outside diameter D | 55 (mm) |
| Length L | 9.5 (mm) |
| Size | JP1 |
| Thread G1 | G3/8"-F |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | EL1 |
