| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | AB1 |
Accessories Wafer Grippers SWGm
Controlled discharge of sucked air (optional) prevents contamination of the process area
Flange modules enable flexible connection to different robot connections and fast gripper change
Gentle handling and precise positioning with the suction/damping module
Holder system HTR for mounting sensors for distance measurement and occupancy testing
Micro valves prevent delays thanks to compressed air control directly at the vacuum generator
Design
Design
- Vacuum/damping module for external hose diameter 4 mm
- HTR holder system with M8x1-IG, M12x1-IG or as a universal holder
- Floating SBSm suction module for hose diameter 4/2 mm
- Flange module for connection to various robots such as ABB, ADEPT, Fanuc, Yaskawa, Kawasaki, Murata, Elau, Stäubli or a universal flange for follow-on work
- Exhaust ducts for the controlled release of intake air - axial or lateral for hose diameter 14 mm
Technical Data
Technical Data
- Components for the modular design of SWGm wafer grippers
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Vietnamese |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 14 results
SBSm 14 90-3 4/2 0
Part no.: 10.01.01.12912
Floating suction cup module for increasing the transfer height of sensitive workpieces
| Width B | 14 (mm) |
| Number of holes | 3 |
| Length L | 30.85 (mm) |
| Angle of radiation | 90 (°) |
| Connection | Hose 4/2 |
| Slewing angle W | 0 (°) |
EMV 1.5 24V-DC 3/2 NC K-2P
Part no.: 10.05.01.00288
Solenoid valve EMV for direct control of compressed air
| Nominal size | 1.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | M5-M |
| Pressure range (operating pressure) [bar] | 2.5 ... 7.0 bar |
| Power consumption DC | 2.8 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.065 (kg) |
| Outside diameter D | 63 (mm) |
| Length L | 10.5 (mm) |
| Size | AD1 |
| Outside diameter D | 80 (mm) |
| Length L | 12 (mm) |
| Size | ST1 |
| Outside diameter D | 63 (mm) |
| Length L | 11.5 (mm) |
| Size | UNI |
| Utilization design | Wafer- / Composite gripper |
| Outside diameter D | 18 (mm) |
| Length L1 | 46 (mm) |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | EL1 |
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Utilization design | Wafer gripper |
| Cross-beam connection | Universal holder |
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Thread G1 | M8x1-F |
| Utilization design | Wafer gripper |