Controlled discharge of sucked air (optional) prevents contamination of the process area
Flange modules enable flexible connection to different robot connections and fast gripper change
Gentle handling and precise positioning with the suction/damping module
Holder system HTR for mounting sensors for distance measurement and occupancy testing
Micro valves prevent delays thanks to compressed air control directly at the vacuum generator
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 14 results
Part no.: 10.05.01.00288
Solenoid valve EMV for direct control of compressed air
| Nominal size | 1.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | M5-M |
| Pressure range (operating pressure) [bar] | 2.5 ... 7.0 bar |
| Power consumption DC | 2.8 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.065 (kg) |
Part no.: 10.01.01.12912
Floating suction cup module for increasing the transfer height of sensitive workpieces
| Width B | 14 (mm) |
| Number of holes | 3 |
| Length L | 30.85 (mm) |
| Angle of radiation | 90 (°) |
| Connection | Hose 4/2 |
| Slewing angle W | 0 (°) |
| Outside diameter D | 63 (mm) |
| Length L | 10.5 (mm) |
| Size | AD1 |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | AB1 |
| Outside diameter D | 63 (mm) |
| Length L | 11.5 (mm) |
| Size | UNI |
Part no.: 10.05.01.00289
Solenoid valve EMV for direct control of compressed air
| Nominal size | 2.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | G1/8"-M |
| Pressure range (operating pressure) [bar] | 2.0 ... 8.0 bar |
| Power consumption DC | 4.5 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.1 (kg) |
| Outside diameter D | 80 (mm) |
| Length L | 12 (mm) |
| Size | ST1 |
| Utilization design | Wafer- / Composite gripper |
| Outside diameter D | 18 (mm) |
| Length L1 | 46 (mm) |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | EL1 |
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Utilization design | Wafer gripper |
| Cross-beam connection | Universal holder |
