Controlled discharge of sucked air (optional) prevents contamination of the process area
Flange modules enable flexible connection to different robot connections and fast gripper change
Gentle handling and precise positioning with the suction/damping module
Holder system HTR for mounting sensors for distance measurement and occupancy testing
Micro valves prevent delays thanks to compressed air control directly at the vacuum generator
Tässä osiossa on saatavilla tämän tuotteen vastaava dokumentaatio.
| Asiakirjat | Kieli |
|---|---|
| Suomalainen |
Dokumentaatio on saatavilla myös kokonaan englanniksi.
| Asiakirjat | Kieli |
|---|---|
| Englanti |
1 - 10 / 14 tuloksista
Osanro: 10.01.01.12912
Floating suction cup module for increasing the transfer height of sensitive workpieces
| Width B | 14 (mm) |
| Number of holes | 3 |
| Length L | 30.85 (mm) |
| Angle of radiation | 90 (°) |
| Connection | Hose 4/2 |
| Slewing angle W | 0 (°) |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | AB1 |
| Outside diameter D | 63 (mm) |
| Length L | 10.5 (mm) |
| Size | AD1 |
| Outside diameter D | 63 (mm) |
| Length L | 11.5 (mm) |
| Size | UNI |
| Outside diameter D | 80 (mm) |
| Length L | 12 (mm) |
| Size | ST1 |
| Utilization design | Wafer- / Composite gripper |
| Outside diameter D | 18 (mm) |
| Length L1 | 46 (mm) |
| Outside diameter D | 55 (mm) |
| Length L | 9.5 (mm) |
| Size | JP1 |
| Thread G1 | G3/8"-F |
| Outside diameter D | 55 (mm) |
| Length L | 7.5 (mm) |
| Size | EL1 |
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Utilization design | Wafer gripper |
| Cross-beam connection | Universal holder |
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Thread G1 | M8x1-F |
| Utilization design | Wafer gripper |
