Takaisin tuoteperheeseen

FSTE-HDB G1/4-AG 80 VG-AB

Osanro: 10.01.02.01377

Spring plunger with damping and height compensation, heavy-duty and ball guided anti-rotation guard

Suction cup connection	G1/4"-M
Vacuum connection	G1/8"-F
Spring stroke Z	80 (mm)
Shape mounting elements	with anti-rotation guard anti-block
Tightening torque (max)	40 (Nm)

Suunnitteludata

Design image

Attribuutti	Arvo
G1	G1/8"-F
G2	G1/4"-M
G3	M20x1.5-M
H	188,3 mm
H2	89,8 mm
LG1	12 mm
LG2	8,5 mm
LG3	44 mm
SW1	24 mm
SW2	17 mm
SW3	22 mm
Z (Stroke)	80 mm

Recommendation: Avoid maximum plunger stroke Z during continuous operation to extend service life Ensure that the hose guide is free from distortion

Tekniset tiedot

Attribuutti	Arvo
Shape mounting elements	with anti-rotation guard anti-block
Spring rate	0,42 N/mm
Spring pretension	12,38 N
Spring force center	29,06 N
Vertical load	2 400 N
Horizontal load	340 N
Tightening torque (max)	40 Nm
Weight	298 g
Operating temperature	0 ... 80 °C
Product family	FSTE-HDB

Note: Spring force: Referred to 50 % of operating stroke Vertical load: Maximum static loading Horizontal load: The specification of the horizontal load refers to the lower edge of the plunger with extended spring. It is a maximum static stress and it impairs the spring compression and extensionin horizontal position.

CAD-tiedot

Live CAD-malli helppokäyttöinen

Kun napsautat latauspainiketta, voit ladata CAD-mallin eri tiedostomuodoissa. Jos esikatselu ei näy oikein tällä sivulla, napsauta "Lataa uudelleen" -painiketta.

Dokumentointi

Lisätarvikkeet

FLK G1/4-IG G1/4-AG

FLK G1/4-IG G1/4-AG 10.01.03.00178 Flexible suction cup mounting for adaptation to sloping surfaces

Thread G1	G1/4"-F
Thread G2	G1/4"-M
Operating temperature	0 ... 70 °C

KGL G1/4-IG G1/4-AG

KGL G1/4-IG G1/4-AG 10.01.03.00110 Suction cup mounting with joint for adaptation to sloping surfaces

Thread G1	G1/4"-F
Thread G2	G1/4"-M
Height H	37.5 (mm)

KGL G1/4-IG M10x1.25-AG

KGL G1/4-IG M10x1.25-AG 10.01.03.00137 Suction cup mounting with joint for adaptation to sloping surfaces

Thread G1	G1/4"-F
Thread G2	M10x1.25-M
Height H	37.5 (mm)

FLK G1/4-IG M10x1.25-AG

FLK G1/4-IG M10x1.25-AG 10.01.03.00206 Flexible suction cup mounting for adaptation to sloping surfaces

Thread G1	G1/4"-F
Thread G2	M10x1.25-M
Operating temperature	0 ... 70 °C

HTR-STA 55 1N D20 WI

HTR-STA 55 1N D20 WI 10.08.03.00086 Holder for flexible mounting of suction cups/spring plungers on sections

Length L	55 (mm)
Connection 1	Sliding block
Suction cup or spring plunger connection	Contour D20-G1/4
Shape	angled

HTR-UNI 2N FSTE-HDB

HTR-UNI 2N FSTE-HDB 10.01.03.00332 Universal holder for adjustable mounting of suction cups

Operating temperature	°C
Shape	for FSTE-HDB
Cross-beam connection	2 sliding block

ST G1/8-AG 4 MS-ROH

ST G1/8-AG 4 MS-ROH 10.08.03.00153 Hose sleeve

Thread G1	G1/8"-M
Hose inner diameter (recom.) d	4 (mm)
Material	Brass
Surface	raw
Length L	4 (mm)
Nominal diameter dn	2.5 (mm)

ST G1/8-AG 6 MS-V

ST G1/8-AG 6 MS-V 10.08.03.00154 Hose sleeve

Thread G1	G1/8"-M
Hose inner diameter (recom.) d	6 (mm)
Material	Brass
Surface	nickel plated
Length L	5 (mm)
Nominal diameter dn	4.4 (mm)

ST G1/8-AG 9 MS-V

ST G1/8-AG 9 MS-V 10.08.03.00155 Hose sleeve

Thread G1	G1/8"-M
Hose inner diameter (recom.) d	9 (mm)
Material	Brass
Surface	nickel plated
Length L	5 (mm)
Nominal diameter dn	4 (mm)

STV-GE G1/8-AG 4

STV-GE G1/8-AG 4 10.08.02.00202 Push-in Fitting, straight

Thread G1	G1/8"-M
Outer hose diameter	4 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	7.9 (mm)
Length L	13.7 (mm)

STV-GE G1/8-AG 6

STV-GE G1/8-AG 6 10.08.02.00204 Push-in Fitting, straight

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	11.4 (mm)
Length L	16.4 (mm)

STV-GE G1/8-AG 8

STV-GE G1/8-AG 8 10.08.02.00206 Push-in Fitting, straight

Thread G1	G1/8"-M
Outer hose diameter	8 (mm)
Material	Brass
Operating temperature	°C
Outside diameter D	14 (mm)
Length L	20.7 (mm)

STV-W G1/8-AG 4

STV-W G1/8-AG 4 10.08.02.00156 Push-in Fitting, swivelling elbow

Thread G1	G1/8"-M
Outer hose diameter	4 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	16.4 (mm)

STV-W G1/8-AG 6

STV-W G1/8-AG 6 10.08.02.00158 Push-in Fitting, swivelling elbow

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	20.1 (mm)

STV-W G1/8-AG 8

STV-W G1/8-AG 8 10.08.02.00160 Push-in Fitting, swivelling elbow

Thread G1	G1/8"-M
Outer hose diameter	8 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	24 (mm)

STV-GE G1/8-AG 6 HT

STV-GE G1/8-AG 6 HT 10.08.02.00389 Push-in Fitting, straight

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Brass
Operating temperature	-20 ... 120 °C
Outside diameter D	11.6 (mm)
Length L	19 (mm)

STV-W G1/8-AG 6

STV-W G1/8-AG 6 10.08.02.00288 Push-in Fitting, swivelling elbow

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Plastics
Operating temperature	°C
Length L	20.8 (mm)

STV-W G1/8-AG 6 HT

STV-W G1/8-AG 6 HT 10.08.02.00391 Push-in Fitting, swivelling elbow

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Brass
Operating temperature	-20 ... 120 °C
Length L	22.5 (mm)

STV-WF G1/8-AG 4

STV-WF G1/8-AG 4 10.08.02.00166 Push-in Fitting, swivelling and lockable

Thread G1	G1/8"-M
Outer hose diameter	4 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	17.4 (mm)

STV-WF G1/8-AG 6

STV-WF G1/8-AG 6 10.08.02.00168 Push-in Fitting, swivelling and lockable

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	21.4 (mm)

STV-WF G1/8-AG 8

STV-WF G1/8-AG 8 10.08.02.00170 Push-in Fitting, swivelling and lockable

Thread G1	G1/8"-M
Outer hose diameter	8 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	23.4 (mm)

STV-WF G1/8-AG 10

STV-WF G1/8-AG 10 10.08.02.00257 Push-in Fitting, swivelling and lockable

Thread G1	G1/8"-M
Outer hose diameter	10 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	25.2 (mm)

STV-T G1/8-AG 4

STV-T G1/8-AG 4 10.09.02.00039 Push-in Fitting, T

Thread G1	G1/8"-M
Outer hose diameter	4 (mm)
Material	Brass
Operating temperature	°C
Length L	32.5 (mm)

STV-T G1/8-AG 6

STV-T G1/8-AG 6 10.09.02.00040 Push-in Fitting, T

Thread G1	G1/8"-M
Outer hose diameter	6 (mm)
Material	Brass
Operating temperature	°C
Length L	41.5 (mm)

STV-T G1/8-AG 8

STV-T G1/8-AG 8 10.09.02.00041 Push-in Fitting, T

Thread G1	G1/8"-M
Outer hose diameter	8 (mm)
Material	Brass
Operating temperature	°C
Length L	48.7 (mm)