| Length L | 600 (mm) |
| Width B | 400 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
Innospann Steel-Plate ISST-MPL and FlexMat SFM
Steel-Plate and Flexmat for use on Matrix-Plate MPL
The modular system for use on the Matrix-Plate MPL can be retrofitted as required
Honeycomb structure of the suction points to increase the usable area for maximum vacuum clamping force
Milling at partial occupancy due to numerous vacuum chambers with integrated flow resistors
FlexMat optimized for production of cutouts and inexpensive and quickly replaceable in case of wear
Elastomer surface with special support withstands strongest lateral forces
Design
Design
- Vacuum blocks ISBL made of aluminum (1) with double seal and magnetic pre-fixation on the Steel-Plate
- Schmalz FlexMat SFM (2) for use directly on the Steel-Plate
- Sealing magnets (3) for unused vacuum openings when used with vacuum blocks ISBL
- Steel-Plate with vacuum openings (4)
- Matrix-Plate MPL (5) as basic unit of the modular clamping system
Tekniset tiedot
Tekniset tiedot
- Steel-Plate ISST and elastomer mat with honeycomb suction points for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For the production of cutouts
Dokumentointi
Dokumentointi
Tässä osiossa on saatavilla tämän tuotteen vastaava dokumentaatio.
| Asiakirjat | Kieli |
|---|---|
| Suomalainen |
Dokumentaatio on saatavilla myös kokonaan englanniksi.
| Asiakirjat | Kieli |
|---|---|
| Englanti |
1 - 4 / 4 tuloksista
| Length L | 300 (mm) |
| Width B | 200 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
| Length L | 400 (mm) |
| Width B | 300 (mm) |
| Height H | 3 (mm) |
| Type | SFM |
| Material | Plastics |
| Utilization design | Matrix-Plate |
| Length L | 298.5 (mm) |
| Width B | 198.5 (mm) |
| Height H | 2.5 (mm) |