| Thread G1 | M20x1.5-M |
| Thread G2 | G1/4"-F |
| Length L | 30 (mm) |
All suction cups and nipples with G1/8"-AG and G1/4"-AG threads can be screwed in
Male thread over the entire height enables fine adjustment when installing the suction cup
Required lock nuts included in the scope of delivery
Stable and rustproof thanks to stainless steel
Projekt
Projekt
- Stainless steel sleeve with male and female threads
- Two locking (galvanized) nuts included
- Flats for spanner on male thread
- Vacuum connection (1) by plug-in union (not inclued in delivery), see chapter "Filters and Connections"
- Suitable suction cups (2) can be found in section "Vacuum Suction Cups"
Dane techniczne
Dane techniczne
- Connection: G1/8" and G1/4"
Dokumentacja
Dokumentacja
Dokumentacja dopasowania dla tego produktu jest dostępna w tej sekcji.
| Dokumenty | Język |
|---|---|
| Polska |
Dokumentacja jest również w pełni dostępna w języku angielskim.
| Dokumenty | Język |
|---|---|
| Język angielski |
1 - 5 z 5 wyników
| Thread G1 | M16x1-M |
| Thread G2 | G1/8"-F |
| Length L | 30 (mm) |
| Thread G1 | M20x1.5-M |
| Thread G2 | G3/8"-F |
| Length L | 30 (mm) |
| Thread G1 | M30x1.5-M |
| Thread G2 | G1/2"-F |
| Length L | 40 (mm) |
| Thread G1 | M10x1-M |
| Thread G2 | M5-F |
| Length L | 20 (mm) |