SA-NIP N008 G1/8-AG DN350
Číslo dílu.: 10.01.01.03532
Suction cup connection nipple
| Thread G1 | G1/8"-M |
| Length L1 | 22 (mm) |
| Fitting length | 5 (mm) |
| Material | Aluminum |
| SW2 | 4 (mm) |
Údaje o konstrukci
Údaje o konstrukci
| Atribut | Wert |
|---|---|
| D | 14 mm |
| dn | 3,5 mm |
| D2 | 8,5 mm |
| G1 | G1/8"-M |
| L | 5 mm |
| L1 | 22 mm |
| L2 | 7 mm |
| L3 | 2 mm |
| LG1 | 8 mm |
| SW1 | 14 mm |
| SW2 | 4 mm |
Technické údaje
Technické údaje
| Atribut | Wert |
|---|---|
| Nipple family | N 008 |
| Material | Aluminum |
| Weight | 4,7 g |
Data CAD
Data CAD
Snadné použití modelu CAD Live
Po kliknutí na tlačítko Stáhnout si můžete stáhnout model CAD v různých souborových formátech. Pokud se náhled na této stránce nezobrazuje správně, klikněte na tlačítko "Znovu načíst".
Příslušenství
PFG 50 FPM-65 N00810.01.01.00077Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Fluorine rubber FPM |
| Material hardness [Shore A] | 65 (Shore A) |
| Material property | non-marking |
PFG 50 HT1-60 N00810.01.01.11168Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Material property | non-marking |
PFG 50 NBR-CO-55 N00810.01.01.10342Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
PFG 50 NBR-55 N00810.01.01.00017Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
PFG 50 PU-55 N00810.01.01.00057Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Polyurethane PU |
| Material hardness [Shore A] | 55 (Shore A) |
PFG 50 SI-55 N00810.01.01.00037Flat suction cup (round) for
smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Material characteristics | FDA-compatible |