STGG S 170x105 1xE100 A PEEK
Onderdeelnr.: 10.01.30.00473
Speciale oppervlaktegrijper voor behoedzame en extreem dynamische handling van kwetsbare werkstukken
| Shape | Lateral exhaust air |
| Length L | 170 (mm) |
| Width B | 105 (mm) |
| Height H | 65 (mm) |
| Number of ejectors | 1 |
| Performance class | E100 |
| Shape compact ejectors | Blow-off function |
| Material | Polyetheretherketon |
Ontwerpgegevens
Ontwerpgegevens
| Attribuut | Waarde |
|---|---|
| B | 105 mm |
| d | 6 mm |
| d1 | 4 mm |
| d2 | 14 mm |
| Dmk | 46 mm |
| G1 | G3/8"-F |
| G2 | M4-IG |
| G3 | M4-F |
| H | 65 mm |
| H2 | 10,5 mm |
| L | 170 mm |
| X1 | 55 mm |
| Y1 | 120 mm |
Technische gegevens
Technische gegevens
| Attribuut | Waarde |
|---|---|
| Holding force | 13 ... 45 N |
| Suction rate | 160 ... 235 l/min |
| Air consumption | 60 ... 120 l/min |
| Pressure range (operating pressure) [bar] | 1,0 ... 3,0 bar |
| Operating temperature | 5 ... 60 °C |
| Weight | 360 g |
| Product family | STGG |
Prestatiegegevens
Prestatiegegevens
CAD-gegevens
CAD-gegevens
Live CAD-model gebruiksvriendelijk
Nadat je op de downloadknop hebt geklikt, kun je het CAD-model in verschillende bestandsformaten downloaden. Als het voorbeeld niet correct wordt weergegeven op deze pagina, klik dan op de knop "Reload".
Documentatie
Documentatie
Accessoires
ABL-SET 14 SWG/SCG10.01.30.00059Afblaasset
| Width B | 23 (mm) |
| Length L | 25.5 (mm) |
| Outer hose diameter | 14 (mm) |
| Utilization design | Wafer- / Coanda gripper |
EMV 1.5 24V-DC 3/2 NC K-2P10.05.01.00288Elektromagnetische klep EMV voor
directe besturing van perslucht
| Nominal size | 1.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | M5-AG |
| Pressure range (operating pressure) [bar] | 2,5 ... 7,0 bar |
| Power consumption DC | 2.8 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.065 (kg) |
EMV 2.5 24V-DC 3/2 NC K-2P10.05.01.00289Elektromagnetische klep EMV voor
directe besturing van perslucht
| Nominal size | 2.5 (mm) |
| Voltage DC | 24 V - DC |
| Function valve | 3/2 multiway valve |
| Control valve | Normally closed |
| Connection thread | G1/8"-AG |
| Pressure range (operating pressure) [bar] | 2,0 ... 8,0 bar |
| Power consumption DC | 4.5 (W) |
| Interface electrical connection | Cable, 2-pole |
| Weight | 0.1 (kg) |
FLAN-PL 55x9.5-JP110.01.30.00194Flensplaat (rond)
| Outside diameter D | 55 (mm) |
| Length L | 9.5 (mm) |
| Size | JP1 |
| Thread G1 | G3/8"-F |
HTR M12x1-IG SWGm10.01.30.00119Houdersystem
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Thread G1 | M12x1-F |
| Utilization design | Wafer gripper |
HTR M8x1-IG SWGm10.01.30.00118Houdersystem
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Thread G1 | M8x1-F |
| Utilization design | Wafer gripper |
HTR-UNI SWGm10.01.30.00117Houdersystem
| Width B | 14 (mm) |
| Length L | 30.9 (mm) |
| Utilization design | Wafer gripper |
| Cross-beam connection | Universal holder |
SBSm 14 90-3 4/2 010.01.01.12912Zweefzuigermodule ter verhoging
van de aanzuighoogte van
gevoelige werkstukken
| Width B | 14 (mm) |
| Number of holes | 3 |
| Length L | 30.85 (mm) |
| Angle of radiation | 90 (°) |
| Connection | Slang 4/2 |
| Slewing angle W | 0 (°) |
SD-MOD 4 32x15x35 FG 9 SWGm10.01.30.00121Vacuüm-/ Absorptie-module
| Width B | 15 (mm) |
| Length L | 32 (mm) |
| Utilization design | Wafer gripper |