RECBi 24V-DC NO PXR-I 1C M12-8
Onderdeelnr.: 10.02.03.00444
Pneumatische eind-arm vacuüm- generator voor lichtgewicht en industriële robots
| Voltage DC | 24 V - DC |
| Control valve | Normally open |
| Rated power | 1 (W) |
| Rated current | 0 (A) |
| Additional function area gripper | PXR (I-shape) |
| Utilization | DIO / IO-Link |
| Dmk | 50 (mm) |
| Electrical connection | Stekker M12, 8 pol |
Ontwerpgegevens
Ontwerpgegevens
| Attribuut | Waarde |
|---|---|
| B | 75 mm |
| B1 | 246 mm |
| d1 | 6,4 mm |
| D2 | 31,5 mm |
| Dmk | 50 mm |
| G2 | M12-AG |
| G3 | G1/8"-F |
| H | 46 mm |
| H1 | 54 mm |
| H2 | 25 mm |
| H3 | 5,1 mm |
| L | 107,5 mm |
| L2 | 70 mm |
| L3 | 75,5 mm |
| X3 | 210 mm |
Technische gegevens
Technische gegevens
| Attribuut | Waarde |
|---|---|
| Degree of evacuation | 85 % |
| Max. vacuum | 850 mbar |
| Suction rate (max.) | 52,5 l/min |
| Rated power | 1 W |
| Voltage DC | 24 V - DC |
| Pressure range (operating pressure) [bar] | 3,00 ... 7,00 bar |
| Electrical connection | Stekker M12, 8 pol |
| Protection type IP | IP 40 |
| Operating temperature | 0 ... 50 °C |
| Control valve | Normally open |
CAD-gegevens
CAD-gegevens
Live CAD-model gebruiksvriendelijk
Nadat je op de downloadknop hebt geklikt, kun je het CAD-model in verschillende bestandsformaten downloaden. Als het voorbeeld niet correct wordt weergegeven op deze pagina, klik dan op de knop "Reload".
Documentatie
Documentatie
Software
Software
De bijpassende software voor dit product is beschikbaar in deze sectie.
| Documentatie | Taal |
|---|---|
| Engels |
Onderdelen
ERS RECB SD10.02.03.00422Set reserveonderdelen
| Utilization design | Pneumatic vacuum generator RECB |
| Operating temperature | °C |
| Pressure range (operating pressure) [bar] | bar |
| contains | Silencer |
| and | Screws |
ERS SEP-13 6xRUE-KLAP10.02.01.01449Set reserveonderdelen
| Utilization design | Ejector module |
| Size | 13 |
| contains | 6x flap |
SEP HV 2 14 13 S10.02.01.01493Vacuümset meertrapsejector
| Suction rate (max.) | 65.8 (l/min) |
| Operating temperature | 0 ... 60 °C |
| Shape | High vacuum |
| Number of stages | 2 |
| Hole diameter | 13 (mm) |
| Shape compact ejectors | S |
| Degree of evacuation | 85 (%) |
| Pressure range (operating pressure) [bar] | 2,0 ... 6,0 bar |
| Optimal operating pressure | 4 (bar) |
SPB1 30 ED-65 G1/4-AG10.01.06.04530Balg-vacuümgrijper (rond) voor
bijzonder oneffen werkstukken
| Size | 30 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 65 (Shore A) |
| Thread G1 | G1/4"-M |
| Number of folds | 1.5 |
Accessoires
VENT-BGR EMVP-5 3/2 NC 24V-DC10.08.09.00032Bouw groep magneet ventiel
Regeling van vacuüm en
perslucht
| Voltage DC | 24 V - DC |
| Pressure range (operating pressure) [bar] | -0,9 ... 8,0 bar |
| Control valve | Normally closed |
| Nominal size | 5 (mm) |
| Nominal flow rate | 3 (m³/h) |
| Type | RECB |
ASK B-M12-8 5000 K-8P21.04.05.00079Aansluitkabel
| Electrical connection | Bus M12, 8 pol |
| Cable length | 5000 (mm) |
| Connection 2 | Cable, 8-pole |
| Material hose | PUR cable |
SD 66.7x24.4x24.5 RECBi10.02.03.00441Geluiddeper voor vacuümgenerator
| Utilization design | Pneumatic vacuum generators RECBi |
| Length L | 66.7 (mm) |
| Width B | 24.4 (mm) |
| Height H | 24.5 (mm) |
ASK B-M12-8 295 WB-M8-8 FANUC21.04.05.00827Aansluitkabel
| Electrical connection | Bus M12, 8 pol |
| Connection 2 | Angle female connector M8, 8-pole |
| Cable length | 295 (mm) |
ASK B-M12-8 280 WB-M8-8 UR21.04.05.00350Aansluitkabel
| Electrical connection | Bus M12, 8 pol |
| Connection 2 | Angle female connector M8, 8-pole |
| Cable length | 280 (mm) |