Izdelek FMP-i-SVK 442 3R18 O20 V0 G32 se postopoma ukine in je na voljo do {{datum, datum in čas}}.

Po tem datumu izdelka ni več mogoče naročiti. Ponujamo vam naslednji alternativni izdelek: Vacuum Area Gripping Systems FA-X / FA-M

Pojdi na alternativni izdelek

Nazaj na družino izdelkov

Informacije o izdelku

POSTAVKA ZA POSTOPNO OPUŠČANJE

FMP-i-SVK 442 3R18 O20 V0 G32

Name: FMP-i-SVK 442 3R18 O20 V0 G32
SKU: 10.01.38.06743

Part no.: 10.01.38.06743

Intelligent area gripping system for external vacuum generator, with ball check valves

Industries: Universal

Length L	442 (mm)
Length L1	446 (mm)
Width B	130 (mm)
Arrangement	3R18
Material type	Foam open, height 20 mm
Shape fittings	Straight
Outside diameter D	32 (mm)
Additional function area gripper	1x control valve vacuum / blow-off
Max. air consumption blow-off	800 (l/min)
Construction vacuum switch	Normally open
Weight	2.8 (kg)
Product family	FMP

Informacije o izdelku

Design Data

Attribute	Value
B	130 mm
B3	21,6 mm
D	32 mm
H	70 mm
H1	111 mm
H2	20 mm
H3	7,7 mm
H4	5,5 mm
H5	41 mm
L	442 mm
L1	446 mm
L2	402 mm
L3	80,9 mm
Y1	90 mm
Valve type	SVK

Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape

Technical Data

Attribute	Value
Arrangement	3R18
Material type	Foam open, height 20 mm
Number of suction cells	66
Suction force at -250 mbar	550 N
Voltage	24V - DC
Electrical connection	Male connect M8, 6 pole
with	No vacuum display
Additional function area gripper	1x control valve vacuum / blow-off
Weight	2,8 kg
Sealing element	Sealing Foam
Required suction capacity for pu = -0.25 bar	300 l/min
Product family	FMP

Note: Air consumption: At a compressed air inlet pressure of 5.5 bar / Suction force: At a vacuum of -0.25 bar and with the gripper fully loaded with a workpiece typical for this application (wooden board with a textured surface) / Required suction capacity: The external vacuum generator used must provide at least the specified suction volume (at the FMP’s vacuum connection piece) at a vacuum of -0.25 bar, but no more than 135% of the specified suction volume

Podatki CAD

Enostavna uporaba CAD-modela v živo

Po kliku na gumb za prenos lahko prenesete model CAD v različnih datotečnih formatih. Če se predogled na tej strani ne prikaže pravilno, kliknite na gumb "Ponovno naloži".

Documentation

Software

The matching software for this product is available in this section.

Documentation	Language
2603	Angleščina

Spare parts

VENT-BGR FMP-i-32 NO 10.01.38.06610 Building group Solenoid valve Control of vacuum and compressed air

Length L	130 (mm)
Width B	23.9 (mm)
Height H	50 (mm)
Measuring range [bar]	bar
Control valve	Normally open
Valve type	FMP-i
Nominal size	32 (mm)

Outside diameter D	12 (mm)
Internal diameter d	9 (mm)
Length max.	50 (m)
Material hose	PU
Bending radius min.	70 (mm)
Pressure range (operating pressure) [bar]	-0.95 ... 10.00 bar
Operating temperature	-20 ... 90 °C
Color	Milky-transparent

Electrical connection	Fem connect M8, 6 pol
Cable length	5000 (mm)
Connection 2	Cable, 6-pole
Material hose	PUR cable

Spring stroke Z	25 (mm)
Shape mounting elements	Heavy duty 2 spring plunger
Utilization design	Mounting section
Size	90x90

Spring stroke Z	50 (mm)
Shape mounting elements	Heavy duty 2 spring plunger
Utilization design	Mounting section
Size	90x90

FMP-i-SVK 442 3R18 O20 V0 G32

Spare parts

Accessories