- WYDAJNOŚĆ
ROB-SET ECBPMi FRUITCORE
Część nr.: 10.03.01.00677
Complete set for connecting and integrating the CobotPump ECBPMi to lightweight robots
Branże: Elektornika | Pakowanie | Tworzywa Sztuczne
| Utilization design | Electrical vacuum generator ECBPMi |
| for | Fruitcore Robotics |
| Type | HORST |
| contains | Suction cup |
| and | Screws |
| Degree of evacuation | 60 (%) |
Dane projektowe
Dane projektowe
| Atrybut | Wartość |
|---|---|
| Lk | 230 mm |
| D | 68 mm |
| D2 | 62,7 mm |
| D mk1 | 46 mm |
| D mk2 | 50 mm |
| G1 | M4-F |
| G2 | G1/4"-F |
| G3 | M6-M |
| G4 | M8-M |
| L | 73,4 mm |
| L1 | 76,4 mm |
| LG1 | 6 mm |
| LG2 | 11,5 mm |
Dane techniczne
Dane techniczne
| Atrybut | Wartość |
|---|---|
| Suction rate (max.) | 1,6 l/min |
| Degree of evacuation | 60 % |
| Voltage DC | 24 V - DC |
| Rated power | 7,2 W |
| Rated current | 0,3 A |
| Electrical connection | Male connect M8, 4 pole |
| Operating temperature | 0 ... 40 °C |
| Protection type IP | IP 40 |
| for | Fruitcore Robotics |
| Product family | ROB-SET-ECBPM |
Dane CAD
Dane CAD
Łatwy w użyciu model CAD na żywo
Po kliknięciu przycisku pobierania można pobrać model CAD w różnych formatach plików. Jeśli podgląd nie jest wyświetlany poprawnie na tej stronie, kliknij przycisk "Przeładuj".
Dokumentacja
Dokumentacja
Części zamienne
ECBPMi 24V-DC FK10.03.01.00500CobotPump (Mini) for electrical
vacuum generation for collaborative
robots
| Voltage DC | 24 V - DC |
| Rated current | 0.3 (A) |
| Electrical connection | Spring contact |
| Operating temperature | 0 ... 40 °C |
| Suction rate (max.) | 1.6 (l/min) |
| Rated power | 7.2 (W) |
SPB1 30 ED-65 G1/4-AG10.01.06.04530Bellows suction cup (round)
for very uneven workpieces
| Size | 30 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 65 (Shore A) |
| Thread G1 | G1/4"-M |
| Number of folds | 1.5 |
SFF 20 SI-55 G1/4-AG10.01.01.14621Flat suction cup (round) for dynamic
handling of thin and flexible
workpieces
| Size | 20 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Product family | SFF |
| Material characteristics | FDA-compatible |
Akcesoria
SLG 102x57 FSGA 210.01.10.14043Ready-to-connect 3D printed
lightweight gripper for customer-
specific applications
| Length L | 102 (mm) |
| Width B | 57 (mm) |
| Height H | 57 (mm) |
| Suction cup type | Bellows suction cups FSGA |
| Number of suction cells | 2 |
SLG 102x102 FSGA 310.01.10.14042Ready-to-connect 3D printed
lightweight gripper for customer-
specific applications
| Length L | 102 (mm) |
| Width B | 102 (mm) |
| Height H | 57 (mm) |
| Suction cup type | Bellows suction cups FSGA |
| Number of suction cells | 3 |
SLG 102x75.3 FSGA 410.01.10.14041Ready-to-connect 3D printed
lightweight gripper for customer-
specific applications
| Length L | 102 (mm) |
| Width B | 75.3 (mm) |
| Height H | 57 (mm) |
| Suction cup type | Bellows suction cups FSGA |
| Number of suction cells | 4 |
VEE-FE 25.4x81.510.01.36.00130Przedłużenie kołnierza
| Outside diameter D | 25.4 (mm) |
| Length L1 | 81.5 (mm) |
| Extension to | 50 (mm) |
VEE-FE 25.4x131.510.01.36.00109Przedłużenie kołnierza
| Outside diameter D | 25.4 (mm) |
| Length L1 | 131.5 (mm) |
| Extension to | 100 (mm) |
VEE-FE 25.4x181.510.01.36.00128Przedłużenie kołnierza
| Outside diameter D | 25.4 (mm) |
| Length L1 | 181.5 (mm) |
| Extension to | 150 (mm) |
Zalecenia dotyczące produktów
- WYDAJNOŚĆ
Zestawy do obsługi ECBPi
- Generator podciśnienia wraz z kołnierzem, chwytakiem i kablem przyłączeniowym
- Możliwa elastyczna wymiana chwytaka
- Wydajność ssania do 12 l/min i maks. podciśnienie: 75
- Odpowiednie do pracy z lekkimi robotami i robotami