| Dimension (LxW) | 145x145 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
Vacuum Blocks VCBL-R 30/40
Clamping of workpieces in grid and nesting applications with maximum flexibility.
With the VCBL-R vacuum block, you can clamp workpieces of all kinds, from rough or textured surfaces to solid wood.
With the extensive portfolio of dimensions and clamping heights, you can release any clamping task. The suction plate can be replaced quickly and without tools, and is also equipped with a membrane. This protects the workpiece from direct contact with the touch valve, which comes as standard, and at the same time prevents the ingress of dirt.
The optional lifting system facilitates the loading and unloading of large, bulky workpieces and protects the sealing edge of the suction plate. The additional hose connection, available as an accessory, enables use at any position on the grid table, even if there is no suction point below the suction cup.
The nesting insert, which allows the suction cup to be used on the nesting plate and thus makes it universally applicable, is also available as an accessory. The time-consuming conversion of another type of block suction cup between grid and nesting applications is now a thing of the past.
Broad product range and 2-in-1 function enable maximum flexibility and shorter set-up times
Vacuum block series with 2-in-1 function for grid and nesting tables
Maximum stability even in demanding applications such as solid wood thanks to solid, one-piece design
Simple, tool-free repair using the proven suction plate system
Gentle loading and unloading of large, unwieldy parts thanks to optional lifting system
Cấu trúc
Cấu trúc
- Touch valve (1) made of soft plastics
- Suction plate with membrane (2) for optimum sealing behavior, high frictional forces and protection against soiling
- Robust main body (3) made of reinforced plastics
- Sealing frame (4)
- Optional nesting insert (5) optimized for use on MDF spoilboards and smooth table systems
- Optional hose connection (6) to increase performance when used in grid and nesting applications
Thông số kỹ thuật
Thông số kỹ thuật
- Vacuum system for grid table applications for all common grid geometries
- Can be converted to nesting table applications with nesting insert
- With optional hose connection
Các ngành
Các ngành
- •Wood
Tài liệu
Tài liệu
Tại phần này, quý vị sẽ tìm thấy các tài liệu hướng dẫn phù hợp với sản phẩm này.
| Tài liệu | Ngôn ngữ |
|---|---|
| Vietnamese |
Tài liệu này cũng có sẵn đầy đủ bằng tiếng Anh.
| Tài liệu | Ngôn ngữ |
|---|---|
| English |
Mô tả chức năng
Mô tả chức năng
From grid table to nesting table
By inserting the nesting insert into the VCBL-R vacuum block, it can be used on nesting tables.
From nesting table to grid table
By removing the nesting insert from the products in the Schmalz VCBL-N series, it can be used on grid tables.
Tool-free adaptation to table system
The click system makes it possible to switch between the table systems without tools and without the use of additional components.
1 - 10 từ 19 kết quả
| Dimension (LxW) | 145x145 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 145x145 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 145x145 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
VCBL-R 145x145x125 30/40 AS+TV
Mã sản phẩm: 10.01.12.05451
Vacuum block for grid tables
Các ngành: Wood
| Dimension (LxW) | 145x145 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 125x75 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 125x75 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 125x75 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
Gợi ý sản phẩm
Mechanical Clamps VCMC-R-QUICK
- Vacuum system for grid tables
- For frames and window profiles
Adapter-Plates Innospann ISAP-R
- Vacuum System for grid tables
- Use of Innospann suction cups
Vacuum Blocks VCBL-N
- Vacuum system for nesting table applications
- With optional hose connection
- Optimized for application on MDF nesting boards
Thông tin thêm
Does the clamping height change if the VCBL-R is fitted with a nesting insert and used on the nesting table?
Does the clamping height change if the VCBL-R is fitted with a nesting insert and used on the nesting table?
Yes, inserting the nesting insert increases the clamping height by 7 mm.
Can the VCBL-R be combined with the VCMC-R-QUICK frame clamp?
Can the VCBL-R be combined with the VCMC-R-QUICK frame clamp?
Yes, the VCBL-R can be combined with the VCMC-R-QUCIK at a clamping height of 45 mm.
The suction points on my grid table are too far apart so that not every suction cup is supplied with vacuum. How can I solve this?
The suction points on my grid table are too far apart so that not every suction cup is supplied with vacuum. How can I solve this?
The additional vacuum connection in the accessories can be used for this purpose. Suction cups that are already supplied with vacuum then serve as a bypass.
What is the reason if the workpiece moves or releases during milling?
What is the reason if the workpiece moves or releases during milling?
First check the suction plate and the sealing frame of the vacuum block. If these are in good condition, check the gauge and the filter of the main pump.
Can I also clamp rough or structured workpieces?
Can I also clamp rough or structured workpieces?
This is possible with the VCSP-O MOS suction plate from the accessories.
How do I choose the correct grid dimension for my CNC machining center?
How do I choose the correct grid dimension for my CNC machining center?
The respective groove dimensions are specified in the technical data of the products.
The illustration shows how to correctly measure the grid dimension (1), the groove width (2) and the groove depth (3).
Are products from 2024 onwards compatible with their predecessors?
Are products from 2024 onwards compatible with their predecessors?
Available in heights of 25, 45 and 125 mm, the vacuum blocks are compatible with the predecessor products from 2024.