With the VCBL-R vacuum block, you can clamp workpieces of all kinds, from rough or textured surfaces to solid wood.
With the extensive portfolio of dimensions and clamping heights, you can release any clamping task. The suction plate can be replaced quickly and without tools, and is also equipped with a membrane. This protects the workpiece from direct contact with the touch valve, which comes as standard, and at the same time prevents the ingress of dirt.
The optional lifting system facilitates the loading and unloading of large, bulky workpieces and protects the sealing edge of the suction plate. The additional hose connection, available as an accessory, enables use at any position on the grid table, even if there is no suction point below the suction cup.
The nesting insert, which allows the suction cup to be used on the nesting plate and thus makes it universally applicable, is also available as an accessory. The time-consuming conversion of another type of block suction cup between grid and nesting applications is now a thing of the past.
Broad product range and 2-in-1 function enable maximum flexibility and shorter set-up times
Vacuum block series with 2-in-1 function for grid and nesting tables
Maximum stability even in demanding applications such as solid wood thanks to solid, one-piece design
Simple, tool-free repair using the proven suction plate system
Gentle loading and unloading of large, unwieldy parts thanks to optional lifting system
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
From grid table to nesting table
By inserting the nesting insert into the VCBL-R vacuum block, it can be used on nesting tables.
From nesting table to grid table
By removing the nesting insert from the products in the Schmalz VCBL-N series, it can be used on grid tables.
Tool-free adaptation to table system
The click system makes it possible to switch between the table systems without tools and without the use of additional components.
| Dimension (LxW) | 145x145 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 145x145 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 145x145 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 145x145 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Lift-off system and sensing valve |
| Dimension (LxW) | 125x75 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 125x75 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 125x75 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 125x75 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 120x50 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 120x50 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 120x50 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 120x50 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 130x30 |
| Height H | 25 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 130x30 |
| Height H | 45 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 130x30 |
| Height H | 90 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
| Dimension (LxW) | 130x30 |
| Height H | 125 (mm) |
| 30 x 30 / 40 x 40 mm | |
| Additional function vacuum block | Touch valve |
Yes, inserting the nesting insert increases the clamping height by 7 mm.
Yes, the VCBL-R can be combined with the VCMC-R-QUCIK at a clamping height of 45 mm.
The additional vacuum connection in the accessories can be used for this purpose. Suction cups that are already supplied with vacuum then serve as a bypass.
First check the suction plate and the sealing frame of the vacuum block. If these are in good condition, check the gauge and the filter of the main pump.
This is possible with the VCSP-O MOS suction plate from the accessories.
The respective groove dimensions are specified in the technical data of the products.
The illustration shows how to correctly measure the grid dimension (1), the groove width (2) and the groove depth (3).
Available in heights of 25, 45 and 125 mm, the vacuum blocks are compatible with the predecessor products from 2024.
