Spare and Wear Parts Vacuum Tube Lifters JumboErgo / Jumbo Sprint
- Wide range of spare and wear parts
- Vacuum generation, lifting hoses, protective hoses, etc
Vacuum Tube Lifters JumboSprint
For compact workpieces weighing up to 300 kg
The JumboSprint is equipped with a bow-shaped operator handle which extends all the way around the unit. This allows the user to optimally position it on compact goods such as bags or rubber bales. The load is raised by pulling up on the handle lever and lowered by pushing down.
All around operator handle for optimal transfer of force and guidance of the device
Modular design and extensive gripper and accessories program for implementing individual requirements
Increases employee motivation and minimizes work-related musculoskeletal disorders
Optional rotation unit for continuously rotating and precisely positioning workpieces up to 200 kg
Handling by only one person
Does a handling system from Schmalz pay off? Find out in just a few clicks!
Would you like to know if investing in a handling system really pays off for you? Our free online amortization calculator will give you a clear answer in no time – fast, simple and completely non-binding. A few clicks are all it takes and you will instantly see when your investment will bring the desired economic success.
Start now – and discover new ways to increase efficiency and reduce costs!
Modular system
Modular system
(1) Radio remote control SRC for vacuum generator (optional)
(2) Filter - changable without tools
(3) Bow-shaped Operator handle for Lifting, lowering and releasing the load
(4) Suspension height can be adjusted without the load attached
(5) Quick-change adapter for vacuum grippers (optional)
(6) Suspension height can be adjusted with a load attached
Modular elements
Modular elements
Quick-change adapter
Versatility is key: Schmalz offers the right suction cups for virtually any application. With quick-change adapter the gripper can be changed quickly and easily.
.jpg)
Single vacuum gripper
For compact goods such as cardboard boxes, barrels, buckets, jugs and cabinets.
.jpg)
Single vacuum gripper, long
For pallets, narrow cardboard boxes, beams, square tubes and other elongated workpieces.
.jpg)
Round vacuum gripper
For barrels, buckets or stone slabs with rough surfaces.
.jpg)
Double vacuum gripper
For cardboard boxes, crates or sheets. The vacuum grippers can be continuously adjusted along the beam.
Double vacuum gripper FMP
For pallets, sections or cut pieces where the vacuum gripper is not fully covered by the workpiece. The grippers can be continuously adjusted along the beam.
Quadruple vacuum gripper
For large cardboard boxes, sheets and non-rigid pieces. The vacuum grippers can be continuously adjusted lengthwise and crossways.
.jpg)
Multiple vacuum gripper
For uneven workpieces such as foil trays or unstable cardboard boxes. The individual vacuum grippers optimally compensate for any unevenness.
Sack gripper
For handling suction tight or porous paper, plastics and fabric bags.
Technical Data
Technical Data
.jpg)
The vacuum tube lifters JumboErgo and JumboSprint can be configured specifically based on the requirements of each individual application due to their modular design. The technical data varies depending on the configuration and on the vacuum gripper chosen.
The following technical data are standard values.
| Type | Workpiece format* Min [mm] |
Workpiece format* Max [mm] |
Operator handle length L [mm] |
Max. lifting speed [m/min] |
Max. lifting stroke Z [mm] |
Height H** [mm] |
|---|---|---|---|---|---|---|
| JumboErgo | 300x200 | 4,000x2,000 | 350-1,000 | 60 | 1,700 | 2,850 |
| 300x200 | 4,000x2,000 | 350-1,000 | 60 | 2,100 | 3,400 | |
| JumboSprint | 300x200 | 3,000x1,000 | 155-500 | 60 | 1,700 | 2,850 |
| 300x200 | 3,000x1,000 | 155-500 | 60 | 2,100 | 3,400 |
A lift capacity of 140 kg and higher applies: lifting stroke Z +160 mm, height H +250 mm
*Depends on the vacuum gripper chosen
**Vacuum gripper not included (total height = H + height of the vacuum gripper)
Lift Capacities
| Jumbo type | Max. lift capacity [kg] | Ø Lift tube | |
|---|---|---|---|
| Horizontal | 90° swivel | D [mm] | |
| Ergo/Sprint 35 | 35 | - | 120 |
| Ergo/Sprint 45 | 45 | 30 | 140 |
| Ergo/Sprint 65 | 65 | 50 | 160 |
| Ergo/Sprint 85 | 85 | 70 | 178 |
| Ergo/Sprint 110 | 110 | 90 | 203 |
| Ergo/Sprint 140 | 140 | 120 | 230 |
| Ergo/Sprint 200 | 200 | - | 250 |
| Ergo/Sprint 300 | 300 | - | 305 |
Videos
Discover application examples of the product in various industries - user-friendly, informative and practical.
No suitable videos found? Then take a look at our media center. Product Inquiry
Spare parts
Accessories
.jpg)
Radio Remote Control SRC
Save up to 40% in energy with the push of a button
With the radio remote control SRC, you can directly switch off the vacuum generator on the operator handle when not in use and then back on again. The radio remote control is activated by a simple button push and needs no energy source due to an integrated solar cell.
Quick-Change Adapter SWA
Instantly switch vacuum gripper
The quick-change adapter SWA allows you to quickly and easily switch the vacuum gripper on your tube lifter in order to adapt to changing workpieces.
Rotation Unit DE
Continuously rotate workpieces
With the rotation unit DE, vacuum-gripped workpieces weighing up to 200 kg can be continuously rotated and positioned precisely.
Venting Unit BEL
Instantly release workpieces
The venting unit BEL allows non-porous workpieces to be released from the vacuum gripper and set down.
Silencer Box SBB
Reduce the sound level
The silencer box SBB reduces the sound level of the vacuum generator to 65 dB(A) and protects it from outside dirt. It can be easily mounted on the optional blower mounting platform.
Dust Filter STF
Protection against dirt
The dust filter STF keeps dirt particles away from the vacuum generator and is always recommended to protect the generator. An optional differential pressure monitor with a signal lamp indicates when the dirty filter has to be changed.
Hose-Cylinder Extension SZV
Reach into deep containers
The hose-cylinder extension SZV enables ergonomic loading and unloading of containers such as lattice boxes.
Motor-Protection Switch MSS
Protection against thermal overload
With the motor-protection switch MSS the vacuum generator can be switched on/off and protected against overcurrent. It can be integrated into the Schmalz crane column without the need for complicated wiring and can be optionally locked.
Protective Tube and Retaining Net
Protection against wear
The protective tube prevents mechanical damage to the lift tube and is easy to clean. The retaining net protects the vacuum grippers and the lift tube when the tube lifter is not in use and allows for space-saving storage.
Product recommendations
Aluminum Bridge Cranes
- Modular crane system for flexible and cost-effective assembly of individual crane solutions
- Installation on ceiling or portal construction
- Particularly suitable for large workspaces
- Lift capacity up to 1,200 kg
Wall-Mounted Jib Cranes
- Mounted using a wall bracket or clasp bracket
- Lift capacity up to 1,000 kg
Column-Mounted Jib Cranes
- Fitted with anchors for floor mounting
- Lift capacity up to 1,000 kg
- Optionally with mobile base plate (lift capacity up to 200 kg)