Individually controllable suction cups per module for maximum flexibility, especially when several modules are linked to form an area gripper
Fast set-up through simultaneous activation of all suction points of an area gripper
Integrated lift when activating the suction cup prevents incorrect parts from being sucked in
Efficient design and operation thanks to simple integration, low vacuum requirement and functional design
Self-locking of suctioned workpieces in the event of loss of actuator voltage
결과 2 중 1 - 2개
부품 번호.: 10.12.10.00024
Vacuum area gripper with individually activatable suction points
| Length L | 180 (mm) |
| Width B | 60 (mm) |
| Height H | 120 (mm) |
| Greiferabstand | 30 (mm) |
| Number of suction plates | 12 |
| Diameter Ds | 20 (mm) |
| Suction cup material | High temperature material HT1 |
| Suction stroke Zs | 5 (mm) |
| Cylinder stroke Z | 10 (mm) |
| Communication | IO-Link (Class B) |
| Electrical connection | Male connect M12, 5 pol |
| Pressure range (operating pressure) [bar] | 4.0 ... 6.0 bar |
| Operating temperature max. | 50 (°C) |
부품 번호.: 10.12.10.00111
Vacuum area gripper with individually activatable suction points
| Length L | 180 (mm) |
| Width B | 60 (mm) |
| Height H | 120 (mm) |
| Greiferabstand | 60 (mm) |
| Number of suction plates | 3 |
| Diameter Ds | 50 (mm) |
| Suction cup material | High temperature material HT1 |
| Suction stroke Zs | 5 (mm) |
| Cylinder stroke Z | 10 (mm) |
| Communication | IO-Link (Class B) |
| Electrical connection | Male connect M12, 5 pol |
| Pressure range (operating pressure) [bar] | 4.0 ... 6.0 bar |
| Operating temperature max. | 50 (°C) |
