| Thread G1 | G1/4"-M |
| Outer hose diameter | 8 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 13.9 (mm) |
| Length L | 17.8 (mm) |
Distributor Selection
The distributor has to match the used hose diameter and the number of suction cups.
Example:
The hose VSL 8/6 has an outside diameter of 8 mm and an internal diameter of 6 mm. Six suction cups are used.
For this example we choose:
Plug-in screw unions STV-GE G1/4-AG 8 for the hose VSL 8/6 with outside diameter 8 mm and internal diameter 6 mm as well as 1/4" thread matching the female thread of the distributor.
Plug-in screw union STV-GE G3/8-AG 8 fits the spring plunger.
Distributor VTR G3/8-IG 9xG1/4 with one input (3/8" thread) and nine outputs (1/4" thread).
Three sealing screws VRS-SB G1/4-AG to close the three open outputs.
Products
| Thread G1 | G3/8"-M |
| Outer hose diameter | 8 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 14.6 (mm) |
| Length L | 17.4 (mm) |
| Inlet | G3/8"-IG |
| Outlets | 9 x thread G1/4"-F |
| Length L | 116 (mm) |
| Width B | 39 (mm) |
| Height H | 24 (mm) |
| Material | Aluminum |
| Thread G1 | G1/4"-M |
| Material | Brass |
| Surface | nickel plated |