Flexibly configurable, perfectly matched individual components
Minimizes configuration and production times thanks to simple plug-in principle
Ready-to-connect end effectors starting at 150 g net weight, ideal for high-speed applications
FDA- and BfR-compliant high-performance thermoplastic, resistant to alkaline cleaning solutions
On request, we can supply a completely assembled and ready-to-connect gripper
.jpg)
(1) Flange plates for standard types of robots
(2) Flange modules rigid or rotating by 360°; can be extended (optional)
(3) Basic modules
(4) Connector node
(5) Top connector G3/8"-F or closed
(6) Bottom connector incl. sealing element G1/8"-F, G1/4"-F, G3/8"-F or closed
(7) Stabilization elements (available as a suction cup accessory)
(8) Screw cover (optional)
(9) Vacuum suction cups (can be selected from the Schmalz product range)
(10) Connection tubes
(11) Plugs for partitioning into different vacuum zones
(12) Plugs
(13) Solenoid valve for active blow off
(14) Vacuum modules flange modules with integrated vacuum generation
Vacuum end effectors VEE can be freely configured within the framework values. When used in connection with our wide selection of suction pads, the possibilities are practically endless.
Specification | Specification Vacuum end effectors from the VEE system | Maximum configuration |
|---|---|---|
Basic module | 1-connection | 4-connection |
Suction pad connection thread | G1/8“-F, G1/4“-F, G3/8“-F | G1/8“-F, G1/4“-F, G3/8“-F |
Gripper size (L/W) | 38 x 38 mm | 300 x 200 mm |
Weight1 | 65 g | 500 g |
Qty. of suction pads | 1 | 12 |
Workpiece sizes (L/W) | 15 x 15 mm | 400 x 300 mm |
1without flange module and suction pad
Specification | Specification Vacuum end effectors from the VEE system |
|---|---|
Max. rated flow | 60 m³/h |
Max. vacuum value | -980 mbar |
Overpressure resistance | up to 3 bar |
Temperature range | -25 °C to +80 °C |
Material | High performance thermoplastic (compliant with FDA guidelines) |
Max. load capacity | 2,000 g |
.jpg)
VEE system expansion for handling complex 3D-shaped products
Low weight by sintered polyamide
Warp resistant gripper for increased cycle speed and load capacity
Realization of complex custom-shaped grippers by innovative sinter technology
Hose-free vacuum distribution (standard) and integrated vacuum generator (option)
.jpg)
.jpg)
.jpg)
